The AT89S52 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port, and interrupt system to continue functioning. The Power Down Mode saves the RAM contents but freezes the oscillator, disabling all other chip functions until the next hardware reset. The Flash program memory supports both parallel programming and in Serial In-System Programming (ISP). The 89S52 is also In-Application Programmable (IAP), allowing the Flash program memory to be reconfigured even while the application is running.
AT89S52 Pin Diagram
AT89S52 Features:
Compatible with MCS-51 Products
8K Bytes of In-System Reprogrammable Flash Memory
Fully Static Operation: 0 Hz to 33 MHz
Three-level Program Memory Lock
256 x 8-bit Internal RAM
32 Programmable I/O Lines
Three 16-bit Timer/Counters
Eight Interrupt Sources
Programmable Serial Channel
Low-power Idle and Power-down Modes
4.0V to 5.5V Operating Range
Full Duplex UART Serial Channel
Interrupt Recovery from Power-down Mode
Watchdog Timer
8K Bytes of In-System Reprogrammable Flash Memory
Fully Static Operation: 0 Hz to 33 MHz
Three-level Program Memory Lock
256 x 8-bit Internal RAM
32 Programmable I/O Lines
Three 16-bit Timer/Counters
Eight Interrupt Sources
Programmable Serial Channel
Low-power Idle and Power-down Modes
4.0V to 5.5V Operating Range
Full Duplex UART Serial Channel
Interrupt Recovery from Power-down Mode
Watchdog Timer
Funtional Block Diagram of Micro-controller
Please update your blog . Tq
ReplyDelete